373 lines
13 KiB
C
373 lines
13 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <stdlib.h>
|
|
#include <sys/cdefs.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "esp_lcd_panel_interface.h"
|
|
#include "esp_lcd_panel_io.h"
|
|
#include "esp_lcd_panel_vendor.h"
|
|
#include "esp_lcd_panel_ops.h"
|
|
#include "esp_lcd_panel_commands.h"
|
|
#include "driver/gpio.h"
|
|
#include "esp_log.h"
|
|
#include "esp_check.h"
|
|
|
|
#include "esp_lcd_nv3023.h"
|
|
|
|
static const char *TAG = "lcd_panel.nv3023";
|
|
|
|
static esp_err_t panel_nv3023_del(esp_lcd_panel_t *panel);
|
|
static esp_err_t panel_nv3023_reset(esp_lcd_panel_t *panel);
|
|
static esp_err_t panel_nv3023_init(esp_lcd_panel_t *panel);
|
|
static esp_err_t panel_nv3023_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data);
|
|
static esp_err_t panel_nv3023_invert_color(esp_lcd_panel_t *panel, bool invert_color_data);
|
|
static esp_err_t panel_nv3023_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y);
|
|
static esp_err_t panel_nv3023_swap_xy(esp_lcd_panel_t *panel, bool swap_axes);
|
|
static esp_err_t panel_nv3023_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap);
|
|
static esp_err_t panel_nv3023_disp_on_off(esp_lcd_panel_t *panel, bool off);
|
|
|
|
typedef struct {
|
|
esp_lcd_panel_t base;
|
|
esp_lcd_panel_io_handle_t io;
|
|
int reset_gpio_num;
|
|
bool reset_level;
|
|
int x_gap;
|
|
int y_gap;
|
|
uint8_t fb_bits_per_pixel;
|
|
uint8_t madctl_val; // save current value of LCD_CMD_MADCTL register
|
|
uint8_t colmod_val; // save current value of LCD_CMD_COLMOD register
|
|
const nv3023_lcd_init_cmd_t *init_cmds;
|
|
uint16_t init_cmds_size;
|
|
} nv3023_panel_t;
|
|
|
|
esp_err_t esp_lcd_new_panel_nv3023(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
nv3023_panel_t *nv3023 = NULL;
|
|
gpio_config_t io_conf = { 0 };
|
|
|
|
ESP_GOTO_ON_FALSE(io && panel_dev_config && ret_panel, ESP_ERR_INVALID_ARG, err, TAG, "invalid argument");
|
|
nv3023 = (nv3023_panel_t *)calloc(1, sizeof(nv3023_panel_t));
|
|
ESP_GOTO_ON_FALSE(nv3023, ESP_ERR_NO_MEM, err, TAG, "no mem for nv3023 panel");
|
|
|
|
if (panel_dev_config->reset_gpio_num >= 0) {
|
|
io_conf.mode = GPIO_MODE_OUTPUT;
|
|
io_conf.pin_bit_mask = 1ULL << panel_dev_config->reset_gpio_num;
|
|
ESP_GOTO_ON_ERROR(gpio_config(&io_conf), err, TAG, "configure GPIO for RST line failed");
|
|
}
|
|
|
|
#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0)
|
|
switch (panel_dev_config->color_space) {
|
|
case ESP_LCD_COLOR_SPACE_RGB:
|
|
nv3023->madctl_val = 0;
|
|
break;
|
|
case ESP_LCD_COLOR_SPACE_BGR:
|
|
nv3023->madctl_val |= LCD_CMD_BGR_BIT;
|
|
break;
|
|
default:
|
|
ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported color space");
|
|
break;
|
|
}
|
|
#else
|
|
switch (panel_dev_config->rgb_endian) {
|
|
case LCD_RGB_ENDIAN_RGB:
|
|
nv3023->madctl_val = 0;
|
|
break;
|
|
case LCD_RGB_ENDIAN_BGR:
|
|
nv3023->madctl_val |= LCD_CMD_BGR_BIT;
|
|
break;
|
|
default:
|
|
ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported rgb endian");
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
switch (panel_dev_config->bits_per_pixel) {
|
|
case 12: // RGB444
|
|
nv3023->colmod_val = 0x33;
|
|
nv3023->fb_bits_per_pixel = 16;
|
|
break;
|
|
case 16: // RGB565
|
|
nv3023->colmod_val = 0x55;
|
|
nv3023->fb_bits_per_pixel = 16;
|
|
break;
|
|
case 18: // RGB666
|
|
nv3023->colmod_val = 0x66;
|
|
// each color component (R/G/B) should occupy the 6 high bits of a byte, which means 3 full bytes are required for a pixel
|
|
nv3023->fb_bits_per_pixel = 24;
|
|
break;
|
|
default:
|
|
ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported pixel width");
|
|
break;
|
|
}
|
|
|
|
nv3023->io = io;
|
|
nv3023->reset_gpio_num = panel_dev_config->reset_gpio_num;
|
|
nv3023->reset_level = panel_dev_config->flags.reset_active_high;
|
|
if (panel_dev_config->vendor_config) {
|
|
nv3023->init_cmds = ((nv3023_vendor_config_t *)panel_dev_config->vendor_config)->init_cmds;
|
|
nv3023->init_cmds_size = ((nv3023_vendor_config_t *)panel_dev_config->vendor_config)->init_cmds_size;
|
|
}
|
|
nv3023->base.del = panel_nv3023_del;
|
|
nv3023->base.reset = panel_nv3023_reset;
|
|
nv3023->base.init = panel_nv3023_init;
|
|
nv3023->base.draw_bitmap = panel_nv3023_draw_bitmap;
|
|
nv3023->base.invert_color = panel_nv3023_invert_color;
|
|
nv3023->base.set_gap = panel_nv3023_set_gap;
|
|
nv3023->base.mirror = panel_nv3023_mirror;
|
|
nv3023->base.swap_xy = panel_nv3023_swap_xy;
|
|
#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0)
|
|
nv3023->base.disp_off = panel_nv3023_disp_on_off;
|
|
#else
|
|
nv3023->base.disp_on_off = panel_nv3023_disp_on_off;
|
|
#endif
|
|
*ret_panel = &(nv3023->base);
|
|
ESP_LOGD(TAG, "new nv3023 panel @%p", nv3023);
|
|
|
|
ESP_LOGI(TAG, "LCD panel create success, version: %d.%d.%d", ESP_LCD_NV3023_VER_MAJOR, ESP_LCD_NV3023_VER_MINOR,
|
|
ESP_LCD_NV3023_VER_PATCH);
|
|
|
|
return ESP_OK;
|
|
|
|
err:
|
|
if (nv3023) {
|
|
if (panel_dev_config->reset_gpio_num >= 0) {
|
|
gpio_reset_pin(panel_dev_config->reset_gpio_num);
|
|
}
|
|
free(nv3023);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static esp_err_t panel_nv3023_del(esp_lcd_panel_t *panel)
|
|
{
|
|
nv3023_panel_t *nv3023 = __containerof(panel, nv3023_panel_t, base);
|
|
|
|
if (nv3023->reset_gpio_num >= 0) {
|
|
gpio_reset_pin(nv3023->reset_gpio_num);
|
|
}
|
|
ESP_LOGD(TAG, "del nv3023 panel @%p", nv3023);
|
|
free(nv3023);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_nv3023_reset(esp_lcd_panel_t *panel)
|
|
{
|
|
nv3023_panel_t *nv3023 = __containerof(panel, nv3023_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = nv3023->io;
|
|
|
|
// perform hardware reset
|
|
if (nv3023->reset_gpio_num >= 0) {
|
|
gpio_set_level(nv3023->reset_gpio_num, nv3023->reset_level);
|
|
vTaskDelay(pdMS_TO_TICKS(10));
|
|
gpio_set_level(nv3023->reset_gpio_num, !nv3023->reset_level);
|
|
vTaskDelay(pdMS_TO_TICKS(120));
|
|
} else { // perform software reset
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_SWRESET, NULL, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(120));
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
// Modified by MakerM0
|
|
// Driver: nv3023, 0.85'TFT
|
|
static const nv3023_lcd_init_cmd_t vendor_specific_init_default[] = {
|
|
// {cmd, { data }, data_size, delay_ms}
|
|
{0xff, (uint8_t []){0xa5}, 1, 0},
|
|
{0x3e, (uint8_t []){0x09}, 1, 0},
|
|
{0x3a, (uint8_t []){0x65}, 1, 0},
|
|
{0x82, (uint8_t []){0x00}, 1, 0},
|
|
{0x98, (uint8_t []){0x00}, 1, 0},
|
|
{0x63, (uint8_t []){0x0f}, 1, 0},
|
|
{0x64, (uint8_t []){0x0f}, 1, 0},
|
|
{0xb4, (uint8_t []){0x34}, 1, 0},
|
|
{0xb5, (uint8_t []){0x30}, 1, 0},
|
|
{0x83, (uint8_t []){0x03}, 1, 0},
|
|
{0x86, (uint8_t []){0x04}, 1, 0},
|
|
{0x87, (uint8_t []){0x16}, 1, 0},
|
|
{0x88, (uint8_t []){0x0a}, 1, 0},
|
|
{0x89, (uint8_t []){0x27}, 1, 0},
|
|
{0x93, (uint8_t []){0x63}, 1, 0},
|
|
{0x96, (uint8_t []){0x81}, 1, 0},
|
|
{0xc3, (uint8_t []){0x10}, 1, 0},
|
|
{0x98, (uint8_t []){0x00}, 1, 0},
|
|
{0xe6, (uint8_t []){0x00}, 1, 0},
|
|
{0x99, (uint8_t []){0x01}, 1, 0},
|
|
{0x70, (uint8_t []){0x09, 0x1d, 0x14, 0x0a, 0x11, 0x16, 0x38, 0x0b, 0x08, 0x3e, 0x07, 0x0d, 0x16, 0x0F,0x14,0x05}, 16, 0},
|
|
{0xa0, (uint8_t []){0x04, 0x28, 0x0c, 0x11, 0x0b, 0x23, 0x45, 0x07, 0x0a, 0x3b, 0x0d, 0x18, 0x14, 0x0F,0x19,0x08}, 16, 0},
|
|
{0xff, (uint8_t []){0x00}, 1, 0},
|
|
{0x11, (uint8_t []){0x00}, 0, 200},
|
|
// {0x36, (uint8_t []){0x88}, 1, 0},
|
|
// {0x2a, (uint8_t []){0x00, 0x00, 0x00, 0xef}, 4, 0},
|
|
// {0x2b, (uint8_t []){0x00, 0x00, 0x01, 0x1b}, 4, 0},
|
|
{0x29, (uint8_t []){0}, 0, 10},
|
|
{0x2c, (uint8_t []){0}, 0, 0},
|
|
};
|
|
|
|
static esp_err_t panel_nv3023_init(esp_lcd_panel_t *panel)
|
|
{
|
|
nv3023_panel_t *nv3023 = __containerof(panel, nv3023_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = nv3023->io;
|
|
|
|
// LCD goes into sleep mode and display will be turned off after power on reset, exit sleep mode first
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_SLPOUT, NULL, 0), TAG, "send command failed");
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]) {
|
|
nv3023->madctl_val,
|
|
}, 1), TAG, "send command failed");
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_COLMOD, (uint8_t[]) {
|
|
nv3023->colmod_val,
|
|
}, 1), TAG, "send command failed");
|
|
|
|
const nv3023_lcd_init_cmd_t *init_cmds = NULL;
|
|
uint16_t init_cmds_size = 0;
|
|
if (nv3023->init_cmds) {
|
|
init_cmds = nv3023->init_cmds;
|
|
init_cmds_size = nv3023->init_cmds_size;
|
|
} else {
|
|
init_cmds = vendor_specific_init_default;
|
|
init_cmds_size = sizeof(vendor_specific_init_default) / sizeof(nv3023_lcd_init_cmd_t);
|
|
}
|
|
|
|
bool is_cmd_overwritten = false;
|
|
for (int i = 0; i < init_cmds_size; i++) {
|
|
// Check if the command has been used or conflicts with the internal
|
|
switch (init_cmds[i].cmd) {
|
|
case LCD_CMD_MADCTL:
|
|
is_cmd_overwritten = true;
|
|
nv3023->madctl_val = ((uint8_t *)init_cmds[i].data)[0];
|
|
break;
|
|
case LCD_CMD_COLMOD:
|
|
is_cmd_overwritten = true;
|
|
nv3023->colmod_val = ((uint8_t *)init_cmds[i].data)[0];
|
|
break;
|
|
default:
|
|
is_cmd_overwritten = false;
|
|
break;
|
|
}
|
|
|
|
if (is_cmd_overwritten) {
|
|
ESP_LOGW(TAG, "The %02Xh command has been used and will be overwritten by external initialization sequence", init_cmds[i].cmd);
|
|
}
|
|
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, init_cmds[i].cmd, init_cmds[i].data, init_cmds[i].data_bytes), TAG, "send command failed");
|
|
vTaskDelay(pdMS_TO_TICKS(init_cmds[i].delay_ms));
|
|
}
|
|
ESP_LOGD(TAG, "send init commands success");
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_nv3023_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data)
|
|
{
|
|
nv3023_panel_t *nv3023 = __containerof(panel, nv3023_panel_t, base);
|
|
assert((x_start < x_end) && (y_start < y_end) && "start position must be smaller than end position");
|
|
esp_lcd_panel_io_handle_t io = nv3023->io;
|
|
|
|
x_start += nv3023->x_gap;
|
|
x_end += nv3023->x_gap;
|
|
y_start += nv3023->y_gap;
|
|
y_end += nv3023->y_gap;
|
|
|
|
// define an area of frame memory where MCU can access
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_CASET, (uint8_t[]) {
|
|
(x_start >> 8) & 0xFF,
|
|
x_start & 0xFF,
|
|
((x_end - 1) >> 8) & 0xFF,
|
|
(x_end - 1) & 0xFF,
|
|
}, 4);
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_RASET, (uint8_t[]) {
|
|
(y_start >> 8) & 0xFF,
|
|
y_start & 0xFF,
|
|
((y_end - 1) >> 8) & 0xFF,
|
|
(y_end - 1) & 0xFF,
|
|
}, 4);
|
|
// transfer frame buffer
|
|
size_t len = (x_end - x_start) * (y_end - y_start) * nv3023->fb_bits_per_pixel / 8;
|
|
esp_lcd_panel_io_tx_color(io, LCD_CMD_RAMWR, color_data, len);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_nv3023_invert_color(esp_lcd_panel_t *panel, bool invert_color_data)
|
|
{
|
|
nv3023_panel_t *nv3023 = __containerof(panel, nv3023_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = nv3023->io;
|
|
int command = 0;
|
|
if (invert_color_data) {
|
|
command = LCD_CMD_INVON;
|
|
} else {
|
|
command = LCD_CMD_INVOFF;
|
|
}
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, command, NULL, 0), TAG, "send command failed");
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_nv3023_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y)
|
|
{
|
|
nv3023_panel_t *nv3023 = __containerof(panel, nv3023_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = nv3023->io;
|
|
if (mirror_x) {
|
|
nv3023->madctl_val |= LCD_CMD_MX_BIT;
|
|
} else {
|
|
nv3023->madctl_val &= ~LCD_CMD_MX_BIT;
|
|
}
|
|
if (mirror_y) {
|
|
nv3023->madctl_val |= LCD_CMD_MY_BIT;
|
|
} else {
|
|
nv3023->madctl_val &= ~LCD_CMD_MY_BIT;
|
|
}
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]) {
|
|
nv3023->madctl_val
|
|
}, 1), TAG, "send command failed");
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_nv3023_swap_xy(esp_lcd_panel_t *panel, bool swap_axes)
|
|
{
|
|
nv3023_panel_t *nv3023 = __containerof(panel, nv3023_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = nv3023->io;
|
|
if (swap_axes) {
|
|
nv3023->madctl_val |= LCD_CMD_MV_BIT;
|
|
} else {
|
|
nv3023->madctl_val &= ~LCD_CMD_MV_BIT;
|
|
}
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]) {
|
|
nv3023->madctl_val
|
|
}, 1);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_nv3023_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap)
|
|
{
|
|
nv3023_panel_t *nv3023 = __containerof(panel, nv3023_panel_t, base);
|
|
nv3023->x_gap = x_gap;
|
|
nv3023->y_gap = y_gap;
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_nv3023_disp_on_off(esp_lcd_panel_t *panel, bool on_off)
|
|
{
|
|
nv3023_panel_t *nv3023 = __containerof(panel, nv3023_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = nv3023->io;
|
|
int command = 0;
|
|
|
|
#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0)
|
|
on_off = !on_off;
|
|
#endif
|
|
|
|
if (on_off) {
|
|
command = LCD_CMD_DISPON;
|
|
} else {
|
|
command = LCD_CMD_DISPOFF;
|
|
}
|
|
ESP_RETURN_ON_ERROR(esp_lcd_panel_io_tx_param(io, command, NULL, 0), TAG, "send command failed");
|
|
return ESP_OK;
|
|
}
|