add some code

main/boards/atk-dnesp32s3/config.h

@@ -0,0 +1,64 @@
+
+#ifndef _BOARD_CONFIG_H_
+#define _BOARD_CONFIG_H_
+
+
+#include <driver/gpio.h>
+
+#define AUDIO_INPUT_SAMPLE_RATE      24000
+#define AUDIO_OUTPUT_SAMPLE_RATE     24000
+
+#define AUDIO_I2S_GPIO_MCLK GPIO_NUM_3
+#define AUDIO_I2S_GPIO_WS GPIO_NUM_9
+#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_46
+#define AUDIO_I2S_GPIO_DIN GPIO_NUM_14
+#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_10
+
+#define AUDIO_CODEC_I2C_SDA_PIN GPIO_NUM_41
+#define AUDIO_CODEC_I2C_SCL_PIN GPIO_NUM_42
+#define AUDIO_CODEC_ES8388_ADDR ES8388_CODEC_DEFAULT_ADDR
+
+#define BOOT_BUTTON_GPIO GPIO_NUM_0
+
+#define BUILTIN_LED_GPIO GPIO_NUM_1
+
+#define LCD_SCLK_PIN GPIO_NUM_12
+#define LCD_MOSI_PIN GPIO_NUM_11
+#define LCD_MISO_PIN GPIO_NUM_13
+#define LCD_DC_PIN GPIO_NUM_40
+#define LCD_CS_PIN GPIO_NUM_21
+
+#define DISPLAY_WIDTH    320
+#define DISPLAY_HEIGHT   240
+#define DISPLAY_MIRROR_X true
+#define DISPLAY_MIRROR_Y false
+#define DISPLAY_SWAP_XY  true
+
+#define DISPLAY_OFFSET_X 0
+#define DISPLAY_OFFSET_Y 0
+
+#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_NC
+#define DISPLAY_BACKLIGHT_OUTPUT_INVERT true
+
+/* 相机引脚配置 */
+#define CAM_PIN_PWDN    GPIO_NUM_NC
+#define CAM_PIN_RESET   GPIO_NUM_NC
+#define CAM_PIN_VSYNC   GPIO_NUM_47
+#define CAM_PIN_HREF    GPIO_NUM_48
+#define CAM_PIN_PCLK    GPIO_NUM_45
+#define CAM_PIN_XCLK    GPIO_NUM_NC
+#define CAM_PIN_SIOD    GPIO_NUM_39
+#define CAM_PIN_SIOC    GPIO_NUM_38
+#define CAM_PIN_D0      GPIO_NUM_4
+#define CAM_PIN_D1      GPIO_NUM_5
+#define CAM_PIN_D2      GPIO_NUM_6
+#define CAM_PIN_D3      GPIO_NUM_7
+#define CAM_PIN_D4      GPIO_NUM_15
+#define CAM_PIN_D5      GPIO_NUM_16
+#define CAM_PIN_D6      GPIO_NUM_17
+#define CAM_PIN_D7      GPIO_NUM_18
+#define OV_PWDN_IO      4
+#define OV_RESET_IO     5
+
+#endif // _BOARD_CONFIG_H_
+